Sabtu, 26 Maret 2011

reset cacon mp258 error 5200.

error 5200 How To Reset error 5200 Canon MP 258
Indicator appears blinking lights on the printer ” P,O, 8″. That Mean The print head temperature above the specified value. You can replace the ink cartridge or refill the cartridge.
Step to resolv this error

Step 1 : Turn Off Printer
Step 2 : Remove Cartridge
Step 3 : Refilling the cartridge
Step 4 : Reinstall the cartridge
Step 5 : Turn The printer ON
If it still does not work you can use the following methods
How To Reset MP 258 error 5200
Step 1 : The printer is off and plug the power cord.
Step 2 : Press the button STOP / RESET and hold, then press and hold the POWER button
Step 3 : POWER button still  press, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed.
Step 4 : Release both buttons simultaneously
Step 5 : The printer will proceed in a while (a while), then the LCD panel will show the number zero (0)
Step 6 : Computer will detect NEW DEVICE, Ignore it…
Step 7 : Press the power button, then the printer will turn off
Step 8 : Press the power button again, then the printer will be  ready to use
DOWNLOAD PROGRAM RESETTER MP258 error 5B00 atau P07  di SINI. (TANPA PASSWORD)


1. Printer MP258 yang error 5B00 atau P07 dalam keadaan mati dan kabel listrik terpasang.
2. Tekan Tombol STOP/RESET dan tahan, kemudian tekan tombol POWER dan tahan.
3. Tombol POWER masih ditekan, lepas tombol STOP/RESET, kemudian tekan tombol STOP/RESET 2 x dalam keadaan tombol power masih ditekan.
4. Lepas kedua tombol secara bersamaan.
5. Printer
MP258 yang error 5B00 atau P07 akan berproses beberapa saat (agak lama), kemudian LCD Panel akan menunjukkan angka NOL (0)
6. Komputer akan mendeteksi DEVICE BARU, Abaikan saja .....
7. Keadaan ini menunjukkan printer MP258 dalam keadaan SERVICE MODE dan siap direset.

Tidak ada komentar:

Posting Komentar